Festo DGSL-6-10-PA 543916 Slide Cylinder

Description:

Specifications：

Similar models:  

• DGSL-6-20-PA 543917  
• DGSL-6-30-PA 543918  
• DGSL-6-40-PA 543919  
• DGSL-6-50-PA 543920  
• DGSL-8-10-PA 543926  
• DGSL-8-20-PA 543927  
• DGSL-8-30-PA 543928  
• DGSL-8-40-PA 543929  
• DGSL-8-50-PA 543930  
• DGSL-8-80-PA 543931  
• DGSL-10-10-PA 543942
• DGSL-10-20-PA 543943
• DGSL-10-30-PA 543944
• DGSL-10-40-PA 543945 
• DGSL-10-50-PA 543946
• DGSL-10-80-PA 543947
• DGSL-10-100-PA 543948
• DGSL-12-10-PA 543961 
• DGSL-12-20-PA 543962
• DGSL-12-30-PA 543963 
• DGSL-12-40-PA 543964
• DGSL-12-50-PA 543965
• DGSL-12-80-PA 543966 
• DGSL-12-100-PA 543967
• DGSL-12-150-PA 543968

FAQ

1.Q: Can the stroke of DGSL-6-10-PA be adjusted?

A: Yes, the stroke can be adjusted to a shorter length than the nominal 10 mm. The stroke adjustment can be achieved by removing the end cover with coarse and fine adjustment screws, matching with buffer bracket accessories.

2.Q: What is the maximum load capacity of this mini slide cylinder?

A: DGSL-6-10-PA is designed for light load & low speed precision applications (suitable for small load of several Newtons to ten Newtons). For specific load torque and thrust value, please refer to the official FESTO load curve of DGSL series.

3.Q: Can the cylinder work with lubricated compressed air?

A: Yes, it is compatible with lubricated compressed air. Once lubrication is used, it must be continuously supplied and cannot be switched to non-lubricated air during operation to avoid seal damage.

4.Q: Does DGSL-6-10-PA support position sensing?

A:A: Yes, the cylinder is equipped with an integrated T-slot for proximity sensors (flush type, no external protrusions). It is perfectly adapted to compact installation space and can be directly assembled with FESTO standard proximity switches.

5.Q: What do the codes "6-10-PA" stand for in DGSL-6-10-PA?

A: The model code definition: 6 = Bore size 6mm; 10 = Nominal stroke 10mm; PA = Standard port configuration with G1/8 thread.